Voldt® Sitecharge | Type 2 | 2x 11kW

The Voldt® Sitecharge is built to slot into the supply
you already have. It runs on AC 220V ±15% or AC 380 V ±15% at 50 Hz, so
single-phase and three-phase sites are both covered without a special feed. The
5m output cable is included, while the input cable is selected by the
installer to suit local code and the 5-pin CEE socket on site.

The IP55 enclosure handles indoor or outdoor
placement, and the operating window of -30 °C to +55 °C means it stays in
service through Northern winters and Southern summers alike. Installation
altitude is rated up to 2,000 m, with operating noise below 30 dB, so it sits
comfortably near offices, residential blocks or workplace car parks.

For sites where a local screen isn't wanted, the
display is removable, which simplifies the install and reduces points of wear
in vandal-prone or tightly controlled environments.

Electrical protection is integrated, not added on. The
Sitecharge ships with an RCD Type A plus DC 6 mA leakage detection, covering AC
residual currents and small DC faults in a single device. The plug itself is
rated IP67 within the IP55 enclosure, which keeps the connection point sealed
during the part of the cycle most exposed to weather and handling.

Material choice does the rest. Contacts are 100%
silvered copper, which avoids the resistance penalties of cheaper alloys, and
the conductors use finely stranded copper for flexibility and resilience under
tight bend radii. The result is reduced heat build-up at the contact points and
less mechanical fatigue over thousands of plug cycles. These are the details
that determine how a charger holds up in year three rather than week one.

Four access methods are supported: plug-and-charge,
app control, optional RFID cards and reservation charging. Sites can run
authenticated sessions where billing or access control matters, or stay with
simple walk-up use where it doesn't.

For operators, the Voldt® Sitecharge offers OCPP over
4G or Ethernet, giving the back-office connection needed for tariffs, session
records, remote oversight and authorisation. Connectivity is optional, so a
basic deployment can stay local and straightforward without losing the option
to scale up later.

Power sharing is handled internally with CT-based load
balancing across single and three-phase metering. In practice that means
available capacity is distributed sensibly between the two outlets, which
protects the upstream supply during peak demand and improves utilisation when
both connectors are in use.

Every Voldt® Sitecharge is supplied with a 3-year
warranty, 100 days of hassle-free returns and free same-day shipping. Clear
coverage, a generous return window and quick dispatch, the basics that keep
installation schedules intact.

Behind the unit is European design and manufacturing
by Voldt®, informed by automotive engineering practice. That heritage shows up
in the specification choices installers actually care about: environmental
ratings, cable construction, and how the product is meant to be serviced over
its working life.

Day-to-day support is straightforward. Whether a site
uses local access or OCPP via 4G or Ethernet, the Voldt® team can assist with
setup guidance within the published specifications. Combined with the warranty
and returns policy, the Sitecharge is backed for the long run rather than just
the unboxing.