3 Pin EV granny charger | Adjustable 8A - 13A | 2,8kW charging cable

3 Pin EV granny charger | Adjustable 8A - 13A | 2,8kW charging cable

The Voldt 3 Pin EV granny charger | Adjustable 8A - 13A | 2,8kW charging cable is designed and manufactured in Europe. With it, you can safely charge your car at domestic outlets in the UK.

The unique feature of this charging cable, developed by us, is that it charges with a current of up to 13A. This allows you to charge your EV or PHEV up to 2.8 kW. Car manufacturers usually supply mobile chargers that can deliver a maximum of 10A (2.3kW). So enjoy faster charging times with the3 Pin EV granny charger | Adjustable 8A - 13A | 2,8kW charging cable!

The charging capacity is also adjustable from 8A to 13A. So you can easily avoid peak moments in the power grid and control your energy consumption. The charging cable is simple to operate and the LCD screen gives you information on charging times, charging rates and temperature.

The mobile charger is IP65 waterproof and meets all European safety requirements and certifications. In case of overheating, the mobile charger stops automatically, and it also features over- and undervoltage protection and leak detection.

The plugs we have developed are produced in one piece and not glued or screwed together. This makes the plugs stronger, more wear-resistant and more waterproof than others on the market. The contact pins in the plug are made of 100% copper and then silver-plated to prevent rust and corrosion.

Is this cable not what you are looking for? Then take a look at all our Mode 2 charging cables or our Mode 3 charging cables.

The charging capacity is also adjustable from 8A to 13A. So you can easily avoid peak moments in the power grid and control your energy consumption. The charging cable is simple to operate and the LCD screen gives you information on charging times, charging rates and temperature.

The mobile charger is IP65 waterproof and meets all European safety requirements and certifications. In case of overheating, the mobile charger stops automatically, and it also features over- and undervoltage protection and leak detection.

The plugs we have developed are produced in one piece and not glued or screwed together. This makes the plugs stronger, more wear-resistant and more waterproof than others on the market. The contact pins in the plug are made of 100% copper and then silver-plated to prevent rust and corrosion.

Delayed charging

Our charger has a delayed charging function and can be set to start charging in a few hours. Power on the charger and connect the vehicle, and then press the adjustment button for 3 seconds to enter the delayed charging mode. Each time you press for 3 seconds, the delay time will increase by one hour, with a max delay of 10 hours. After setting the time, the countdown starts, and charging starts after the countdown ends.